汪恩浩

发布时间：2019-06-11


汪恩浩  副教授，硕士生导师。主要研究方向为新型金属层状复合材料的设计、制备及力学性能；高熵合金的设计、组织调控及变形行为研究。担任Adv. Sci., J. Alloys Compd., Mater. Des., Surf. Interfaces, J. Mater. Sci., Mater. Chem. Phys., Appl. Surf. Sci. 等期刊审稿人。在 Mater. Sci. Eng. A, J. Alloys Compd., Surf. Coat. Technol., Mater. Des., J. Mater. Res. Technol., Appl. Surf. Sci. 等期刊发表SCI论文40余篇，其中以第一作者或通讯作者发表SCI论文30余篇。

 

学习/工作经历：

2012年9月-2013年6月，哈尔滨工程大学材料学专业，硕士毕业

2013年9月-2017年6月，哈尔滨工程大学材料学专业，获博士学位

2017年9月至2024年8月，哈尔滨理工大学，讲师

2024年9月至今，哈尔滨理工大学，副教授

 

科研项目：

1. 国家自然科学基金项目，新型NiTi/（Al3Ti+Al3Ni）层状复合材料界面行为研究，主持

2. 黑龙江省科学技术厅联合引导项目，冷喷涂陶瓷颗粒增强铝基复合涂层微观结构演变与力学行为研究，参与

3. 国家自然科学基金，Ti/Al3Ti层状复合材料动态断裂行为及其损伤演化研究，参与

4. 上海航天科技创新基金项目，连续纤维增强层状复合材料制备及性能研究，参与

 

部分研究成果：

  1. Enhao Wang, Zhehao Liu, Shijie Wei, Fuwei Kang, Jianlin Dong, Deyun Li, Jinlong Wang, Xiang Li, Wei Jiang. Tailoring yttrium distribution to achieve strength-ductility synergy in dual-phase refractory high-entropy alloys via quenching. Journal of Alloys and Compounds, 2026.

  2. Wei Jiang, Wenlong Cui, Aoqing Zhang, Yang Liu, Enhao Wang, Fan Zhao,  Zhiyuan Wang, Hongbin Dai. Synergistic effects of Mo doping on the mechanical properties and multi-environment corrosion behavior of CoCrNiTiMo high-entropy alloy films. Applied Surface Science, 2026.

  3. Zhehao Liu, Xiang Li, Shijie Wei, Fuwei Kang, Jianlin Dong, Enhao Wang. Breaking the strength-ductility trade-off: Synergistic mechanisms of quenching-induced dendritic element segregation in dual-phase refractory high-entropy alloys. Journal of Alloys and Compounds, 2025.

  4. Enhao Wang, Zhehao Liu, Fuwei Kang, Hongtao Chen, Chunfa Lin,  Yuqiang Han, Jianlin Dong, Jiaqi Li, Wei Jiang. Dual-BCC microstructure evolution and strengthening mechanisms in Yttrium-modified (Ti25Zr25Nb20Hf5Ta15W10)100-xYx refractory high-entropy alloys. Materials Science & Engineering A, 2025.

  5. Wei Jiang, , Yilin Jiang, Zonglin Li, Zhiyuan Wang, Yang Liu, Enhao Wang, Fan Zhao. Effect of nitrogen doping on microstructure, mechanical properties and corrosion resistance of CoCrFeNiCuNx high-entropy alloy thin films, 2025.

  6. Enhao Wang, Jianlin Dong, Shijie Wei, Fuwei Kang, Hongtao Chen, Yang Cao, Fengchun Jiang, Zhehao Liu, Jiaqi Li, Wei Jiang. Microstructure evolution and enhanced strength-toughness balance in Gd-doped CoCrFeNiV0.4 high-entropy alloys after cold rolling and annealing. Journal of Alloys and Compounds, 2025.

  7. Jianlin Dong, Enhao Wang*, Shijie Wei, Fuwei Kang, Hongtao Chen, Fengchun Jiang Zhehao Liu, Jiaqi Li, Wei Jiang. Synergistic enhancement of cryogenic strength–toughness in CoCrFeNiV0.4 high-entropy alloys via Gd microalloying and thermomechanical processing. Materials Science & Engineering A，2025.

  8. Enhao Wang, Jianlin Dong, Fuwei Kang, et al. Effects of Gd on the microstructure and mechanical properties of GdₓCoCrFeNiV₀.₄ high-entropy alloys. Journal of Materials Research and Technology. 2024, 33: 714-724.

  9. Yuqiang Han, Keke Lv, Chunfa Lin, Yuxuan Dai, Xiang Li，Enhao Wang*. Sheet-based friction stir additive manufactured 6061 aluminium alloy: Microstructure, texture evolution and mechanical properties. Materials Science and Engineering A, 2024, 915:147295.

  10. Fuwei Kang, Bingpeng Zhang, Enhao Wang*, et al. Effect of Double-Stage Aging on the Microstructure and Properties of 2024 Aluminum Alloy. Journal of Materials Engineering and Performance, 2024.

  11. Enhao Wang, Jiaqi Li, Fuwei Kang, et al. Effect of warm-rolling and annealing on the microstructure and mechanical properties of dual-phase Al₀.₄₅CoCrFeNiTi₀.₂₅ high-entropy alloy. Journal of Materials Research and Technology. 2024, 33: 9001-9013.

  12. Enhao Wang, Jiaqi Li, Fuwei Kang, et al. Balancing the mechanical properties of Al0.45CoCrFeNiTix high-entropy alloys by tailoring titanium content, Journal of Materials Research and Technology. 2024, 28: 967-979.

  13. Enhao Wang, Lisong Lv, Fuwei Kang, et al. Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite. Composite Interfaces 2024, 31: 165-180.

  14. Enhao Wang, Lisong Lv, Fuwei Kang, et al. Microstructure and bending behavior of Ti/Al laminated composites reinforced with highentropy alloy particles, Journal of Materials Research and Technology. 2023, 27: 7495-7505.

  15. Fuwei Kang, Pei Xu, Enhao Wang*, et al. Influences of Ni Addition on Microstructure and Mechanical Properties of Cast Aluminum Alloy 207. Journal of Materials Engineering and Performance 2023: 1-9.

  16. Enhao Wang, Lisong Lv, Fuwei Kang, et al. Microstructure and Mechanical Properties of AlCoCrFeNi High-Entropy Alloy-Reinforced Ti-Al Metallic-Intermetallic Composites. JOM, 2023, 75: 5559-5567.

  17. Enhao Wang, Xiaoting Qi, Fuwei Kang, et al. Study on the microstructure and properties of graphene powder-reinforced Ti-Al metal-intermetallic laminated composite. Journal of Materials Engineering and Performance 2023: 1-11. 

  18. Fuwei Kang, Enhao Wang*, Chun Tian, et al. Effect of trace Sc and Zr on microstructure and properties of as-cast 5182 aluminum alloy. International Journal of Materials Research. 2022, 113: 701-711.

  19. Fuwei Kang, Ximeng Zhang, Fahong Zhang, Enhao Wang*, et al. Microstructure and mechanical properties of superelastic NiTi fiber reinforced NiTi/(Al3Ti+Al3Ni) metal-intermetallic laminated (SFR-MIL) composites. Materials Research Express 2021,8: 066501.

  20. Fuwei Kang, Shijie Wei, Jimin Zhang, Enhao Wang*, et al. Hot processing maps and microstructural characteristics of A357 alloy. Journal of Materials Engineering and Performance 2020,29: 7352-7360.

  21. Fuwei Kang, Shijie Wei, Wanwen Hu, Enhao Wang*. Effect of solid solution process on microstructure and properties of 6082 aluminum alloy. Materials Research Express 2019, 6: 1165c3.

  22. Enhao Wang, Fuwei Kang, Hongbin Wang, et al. Fabrication, microstructure and mechanical properties of novel NiTi/(Al3Ti+ Al3Ni) laminated composites. Journal of Alloys and Compounds. 2019, 775: 1307-1315. 

  23. Enhao Wang, Yao Tian, Zhenqiang Wang, et al. A study of shape memory alloy NiTi fiber/plate reinforced (SMAFR/SMAPR) Ti-Al laminated composites. Journal of Alloys and Compounds. 2017,696: 1059-1066.

  24. Enhao Wang, Chunhuan Guo, Peijun Zhou, et al. Fabrication, mechanical properties and damping capacity of shape memory alloy NiTi fiber-reinforced metal–intermetallic–laminate (SMAFR-MIL) composite. Materials & Design. 2016, 95: 446-454. 

  25. 汪恩浩; 吕立松; 康福伟; 齐晓婷; 赵翌岑 ; 一种利用AlCoCrFeNi高熵合金增强Ti-Al系层状复合材料的方法, 2024-01-26, 中国, CN202210705495.2 (专利)

  26. 汪恩浩; 李嘉琪; 康福伟; 吕立松; 董建林; 刘哲豪 ; 一种改善双相高熵合金强度和塑性的方法, 2024-09-06, 中国, CN202410024315.3 (专利)

  27. 汪恩浩; 董建林; 康福伟; 李嘉琪; 刘哲豪; 曹阳; 吕立松 ; 一种含Gd与V的高强度CoCrFeNi高熵合金及其制备方法, 2025-1-24, 中国, CN202410476565.0 (专利)

  28. 汪恩浩; 刘哲豪; 康福伟; 李嘉琪; 董建林; 吕立松;一种含稀土Y的高强度耐高温TiZrNbHfTaW系难熔高熵合金及其制备方法, 2025-4-4, 中国, ZL 202410715860.7 (专利)

     

    指导学生：

    研究生方面，指导多位研究生获得校级优秀研究生；2024-2025年，研究生获得国家奖学金4人次；指导学生参加中国大学生机械工程创新创意大赛材料热处理创新创业赛获得决赛二等奖；一人获得校级优秀毕业生称号。

    本科生方面，指导学生获得校级优秀毕业论文；指导学生获得黑龙江省优秀毕业生荣誉。

     

    研究生毕业去向

毕业年级

姓名

毕业去向

2023届毕业生

齐晓婷（第一位毕业生）

佳木斯大学教师

2024届毕业生

吕立松

西安工业大学读博

2025届毕业生

李嘉琪

佳木斯大学教师

2026届毕业生

董建林

哈尔滨工业大学读博

2026届毕业生

刘哲豪

东北大学读博

2027届毕业生

李德运

在读

2027届毕业生

王金龙

在读

2028届毕业生

李子昂

在读

2028届毕业生

许邵凯

在读

 

 

研究生招生：

课题组每年招收金属材料、材料成型及相关专业硕士研究生2名。

课题组研究方向明确、科研氛围良好。本人性格随和，注重科研训练与能力培养，鼓励学生独立思考与创新实践，愿与学生携手成长。

欢迎心理健康、积极进取、对材料科学研究有浓厚兴趣的同学报考。

联系方式：enhaowang@hrbeu.edu.cn。